Stainless Steel Knife Gate Valve-manufacture,factory,supplier from China

(Total 10 Products for Stainless Steel Knife Gate Valve)

Stainless steel knife gate valve ANSI/DIN/JIS

Gate valves commonly have flanged ends which are drilled in step with pipeline compatible flange dimensional standards. gate valves are commonly made out of cast iron, ductile iron, cast carbon metallic, gun metallic, stainless-steel, alloy steels, and forged steels.Gate valves are characterised as having both a growing or a nonrising stem. growing stems provide a visual indication of valve role because the stem is connected to the gate such that the gate and stem upward thrust and decrease collectively as the valve is operated.

Contact Now

DIN Gate Valve with Brass seat

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards. Gate valves are typically constructed from cast iron, ductile iron, cast carbon steel, gun metal, stainless steel, alloy steels, and forged steels.Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated.

Contact Now

Threaded Ball Valve

Application1.Design and ManufactureANSI B16.12.Face to faceANSI B16.103.Flange End DimensionsBS45044.Working Pressure150PSI Steam Basic Rating5.Pressure TestAPI598Main Parts and MaterialsNumberPart NameMaterial1BodyCF8M/CF82BonnetCF8M/CF83BallSS304/SS3164SeatPTFE/RPTFE5GasketPTFE6StemSS AISI 4107Stem PackingPTFE8Stop CollarCarbon Steel(ASTM A307)9LeverSS304

Contact Now

ANSI Gate Valve

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards.

Contact Now

Stainless Steel CF8 CF8M CF3M Butterfly Valve Body

Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking waterDry powder Food and beverage Gas plantsHAVC Mining industry Paper industry Sand handling Seawater Su

Contact Now

Ductile Iron Gate Valve ANSI/DIN/JIS Standard

F4 Ductile Iron Gate Valve

Gate valves are characterised as having either a rising or a nonrising stem. rising stems offer a visual indication of valve function due to the fact the stem is connected to the gate such that the gate and stem upward push and lower together because the valve is operated. nonrising stem valves may additionally have a pointer threaded onto the upper end of the stem to suggest valve role, since the gate travels up or down the stem on the threads with out elevating or reducing the stem.

Contact Now

Mental PTFE or Rubber Coated Butterfly Valve

Stainless Steel Full PTFE Coated Butterfly Valve

Tetrafluoride butterfly valve is to adapt to a few corrosive surroundings with sturdy acid and alkali, petroleum, chemical, food and other special fields, within the conventional butterfly valve valve and valve plate covered with ptfe, in order that the medium and valve frame isolation, to achieve anticorrosive effect.Technical Parameters:SizeDN50-DN600Working pressure10BarShell15BarSeal(Air)11BarOperating Temperature-20℃~+180℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs

Contact Now

WRAS rubber Gate Valve DIN PN16

Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated. Nonrising stem valves may have a pointer threaded onto the upper end of the stem to indicate valve position, since the gate travels up or down the stem on the threads without raising or lowering the stem.

Contact Now

Stainless Steel Lever

1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.

Contact Now

Pneumatic Butterfly Valve

The pneumatic butterfly valve is composed of a pneumatic actuator and a butterfly valve. The pneumatic butterfly valve is a pneumatic valve that uses a circular butterfly plate that rotates with the valve stem to realize the opening and closing. It is used more and more on medium-bore pipes. Pneumatic butterfly valve classification: stainless steel pneumatic butterfly valve, hard seal pneumatic butterfly valve, soft seal pneumatic butterfly valve, carbon steel pneumatic butterfly valve.

Contact Now

Relate News

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Matters Needing Attention in the Use of Gate Valves

1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.

Characteristics of Strainer Valve

The filter net adopts stainless steel double-layer net structure, which is durable, advanced in structure, small in flow resistance, convenient in sewage discharge, etc. It can be used in water, steam, oil, nitric acid, urea, oxidizing medium and other media. According to the user's needs, the mesh number of filter screen should be set, generally, the water supply network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil supply network is 100-480 mesh.

Difference Between Butterfly Valve and Gate Valve

Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.

Pressure Test Method Of Check Valve

Check valve is a valve that relies on the medium itself to flow and automatically open and close the valve flap, used to prevent the backflow of the medium, also known as check valve, check valve, backflow valve, and back pressure valve.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

China Refrigation Equipment Exhibition

The Chinese Refrigation Equipment Exhibition is the most special exhibition in Refrigation field.Our Diefei Brand Check valve and Butterfly valve is an important part of this Exhibition.We have the expertise and experience to produce,also have a big After-service team . We get the high apprecition from our customers.

Common Check Valve Materials

Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.