DIN 2533-manufacture,factory,supplier from China

(Total 10 Products for DIN 2533)

Wafer type butterfly valve

Design CodeAPI 609Inspection &TestAPI 598End StandardDIN PN10,DIN PN16, ANSI B16.1, JIS 10KFace to FaceAPI 609MaterialBodyCast Iron/Ductile Iron/Cast SteelDiscDI+Ni/SS304/SS316/AL-BZStemSS416/SS304/SS316/17-PHSeatEPDM/NBR/VITON/PTFE/CROperationHandlever GearboxSizeDN25-DN1200

Contact Now

Without Pin Wafer type Butterfly Valve

Contact Now

API6D Short Pattern Single Disc Wafer Check Valve

Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media flowing backwards and prevent damaging water hammer,guarantee the safety using of pipes.Features:1. The products are new structure .small and light weight2. Reliable sealed,endurable open-close,erar-resisting,long life.3. With less flowing resistance than old check valve and obviou

Contact Now

Wafer Type Single Board Check Valve Aluminum

Wafer Type Single Board Check Valve Stainless Steel

Take a look at valve refers to the outlet and ultimate parts of the round disc and through its own weight and media stress generated movement to block the media float again valve. automatic valve magnificence, also referred to as test valve, one-way valve, backflow valve or isolation valve.Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media

Contact Now

WRAS rubber Gate Valve DIN PN16

Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated. Nonrising stem valves may have a pointer threaded onto the upper end of the stem to indicate valve position, since the gate travels up or down the stem on the threads without raising or lowering the stem.

Contact Now

DIN Strainer epoxy coating

Y-kind strainer in various industries inside the use of powerful treatment of a large range of life and industrial sewage, in order that valuable water resources have been efficiently reused, saving a whole lot of water resources. y-type strainer operation benefits encompass full automation, maintenance-loose, huge filtration vicinity, excessive filter out efficiency, long carrier life, stainless steel material, optionally available filtration accuracy, whole specs. in comparison with different filtration gadget, it is one of the only gadget in reclaimed water reuse engineeri

Contact Now

Double Offset Flanged Type Butterfly Valve DIN PN10-16

This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking wate

Contact Now

DIN Strainer Cast Iron Body

As compared with different filtration device, it is one of the only gadget in reclaimed water reuse engineering. furthermore, the water excellent after y-type filter out treatment not only reaches the release wellknown stipulated by way of the state, however additionally realizes the cause of repetition and recycling. Technical Parameters:SizeDN40-DN600Working pressure16Bar10BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drillin

Contact Now

DIN Gate Valve with Brass seat

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards. Gate valves are typically constructed from cast iron, ductile iron, cast carbon steel, gun metal, stainless steel, alloy steels, and forged steels.Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated.

Contact Now

ANSI 125/DIN PN10/16 JIS 10K/JIS 5K Butterfly Valve Usual Flange

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contact Now

Relate News

Check Valve Applications

The purpose of using check valve is to avoid the backflow of medium, generally in the outlet of the pump should be installed check valve. In addition, the outlet of the compressor should also be installed check valve. In summary, in order to avoid the backflow of the medium, in the equipment, installation or pipeline should be installed check valve in general in the nominal diameter of 50mm of the horizontal pipeline are selected vertical lift check valve. Straight lift check valve in the horizontal pipeline and straight pipeline can be installed.

Pressure test method of check valve

Check valve refers to the valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the backflow of the medium, also known as check valve, one-way valve, reverse flow valve, and back pressure valve.

The principle of check valve opening and closing

The check valve opening and closing parts are opened or closed by themselves by the flow and force of the medium to prevent the backflow of the medium. The valve is called a check valve. The check valve belongs to the automatic valve category, which is mainly used in the pipeline where the medium flows in one direction, and only allows the medium to flow in one direction to prevent accidents. The check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline.

In 2022, do not forget the original intention, forge ahead, and continue to innovate

Entering 2022, our orders for butterfly valves and check valves are increasingly full, and the delivery date has been scheduled to April. We will continue to maintain a booming production and sales situation, and will not be affected by the Spring Festival holiday at all. The delivery date will start in late February.In addition, in a new field, the photovoltaic new energy business sector, our company continued to win the bid for the supporting projects for the newly expanded production base of JA Technology and LONGi Group.

Advantage of JIS Y-Strainer Ductile Iron Body

Y-kind strainer as an fundamental high-efficiency filtration system within the purification system engineering, has performed a exquisite position within the remedy of domestic wastewater and business sewage. with various blessings in layout and alertness, it's miles now desired.

Common Check Valve Materials

Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.

Advantages Of Two Shaft Wafer Type Butterfly Valve

Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.

Introduction of Slient Check Valve Wafer Type

Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve. automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve. disc movement is split into lifting and swing. elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc. the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect). valve

Difference Between Butterfly Valve and Gate Valve

Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.