Aluminum Lever-manufacture,factory,supplier from China
(Total 10 Products for Aluminum Lever)
The anti-condensation butterfly valve usually refers to the butterfly valve whose body is made of aluminum alloy.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
The principle of the anti-condensation butterfly valve is due to the corrosion resistance of the aluminum alloy body, which is light in weight and easy to install; the spherical structure around the butterfly plate is helpful to reduce the friction torque with the valve seat; the butterfly plate and the valve shaft are made of stainless steel, which increases The anti-corrosion ability also plays a role in reducing heat conduction and preventing the temperature of the driving device from being too low; the housing of the driving device is made of aluminum alloy, which is light in weight and fa
Contact Now
The anti-condensation butterfly valve usually refers to the butterfly valve whose body is made of aluminum alloy.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform. 2, easy structure, small size, light weight. Three, can shipping dust, on the mouth of the least liquid accumulation. Four.
Contact Now
Size:2"-12"Pressure:200PSI/150PSIANSI Class: Class 125/Class 150Features: Short Neck,Two shaft/Pinless Type/ Notched BodyMaterial:Body: Cast Iron A126/ Ductile iron ASTM A536Disc: Ductile Iron (Ni Plated),Ductile Iron (Nylon Coated),Aluminum Bronze,CF8M / SS316Seat: E.P.D.M, BUNA-N,F.K.M./VITON, P.T.F.E (Teflon)Stem: Stainless Steel 416/ Stainless Steel 304Stem Style:Doubel D / Square ShaftOperator: Lever/ Gear / Actuator
Contact Now
100% bi-directional tight close-off. set up with out restrction in route of drift.decreased weight and overall dimensions.low pressure loss and reduced energy prices.
Contact Now
Relate News
The check valve opening and closing parts are opened or closed by themselves by the flow and force of the medium to prevent the backflow of the medium. The valve is called a check valve. The check valve belongs to the automatic valve category, which is mainly used in the pipeline where the medium flows in one direction, and only allows the medium to flow in one direction to prevent accidents. The check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline.
The filter net adopts stainless steel double-layer net structure, which is durable, advanced in structure, small in flow resistance, convenient in sewage discharge, etc. It can be used in water, steam, oil, nitric acid, urea, oxidizing medium and other media. According to the user's needs, the mesh number of filter screen should be set, generally, the water supply network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil supply network is 100-480 mesh.
1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden.
2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top).
3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force).
4. Gate valve with transmission mechanism shall be installed according to the product instruction manual.
5.
Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.
The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.
Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.
In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.
Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.
Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve. automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve. disc movement is split into lifting and swing. elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc. the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect). valve
The purpose of using check valve is to avoid the backflow of medium, generally in the outlet of the pump should be installed check valve. In addition, the outlet of the compressor should also be installed check valve. In summary, in order to avoid the backflow of the medium, in the equipment, installation or pipeline should be installed check valve in general in the nominal diameter of 50mm of the horizontal pipeline are selected vertical lift check valve. Straight lift check valve in the horizontal pipeline and straight pipeline can be installed.
